Chofor muscle theragun model DF-J23 is our new design in 2022. This is professional model with six massage heads. Massage gun is more and more popular among office workers, sports lovers, athletes and rehabilitation people. It's important for you to have some knowledge on solving common malfunctions.
There are two main faults: unable to boot and unable to charge.
One is unable to boot:
1. The temperature is too high. If the fascia gun is used in an environment above 40 degrees Celsius, the fascia gun may be punished for overheating protection, and the host may not be able to boot normally.
Solution: Stand still for 2 hours in an environment below 40 degrees Celsius, and then turn it on for use.
2. The battery power is "0". When the battery is dead, if the user does not charge for a long time, the battery will produce low-power protection, which is collectively referred to as over-discharge protection. At this time, the fascia gun will not work properly.
Solution: keep the power off, connect the charger to let the fascia gun enter the charging mode, and then turn on the fascia gun after it is fully charged, and it can work normally.
3. The fascia gun cannot be turned on.
Solution: Check whether the power is sufficient. If it has not been used for a long time, please charge it for more than 5 hours.
The second is that it cannot be charged:
1. The temperature of the muscle theragun is too high. When the temperature of the main body of the fascia gun is too high, it will not be able to be charged when it is connected to the charger. Solution: keep it still for 2 hours in an environment below 40 degrees Celsius, and then perform the charging operation.
2. The temperature of the charger is too high. When the fascia gun is charged in an environment above 40 degrees Celsius, the charger will trigger overheat protection and cannot be charged normally.
Solution: keep it still for 2 hours in an environment below 40 degrees Celsius, and then perform the charging operation.
3. The fascia gun cannot be charged
Solution: Check whether the charging port is inserted in place.
